Spline Gauges
Piccadilly,
Tamworth,
Staffordshire,
B78 2ER, UK.
Tel: +44 1827 872771
Fax: +44 1827 874128 / 874791
HELICAL MASTER GEAR
| Conforms to any of the following standards :- | |
| ISO (International) | |
| DIN (German) | |
| BS (British) | |
| AGMA (American) | |
| JIS (Japanese) | |
| Range :- | |
| Max. diameter | 300mm |
| Min. diameter | 6mm |
| Max. number of teeth | 550 |
| Max. pitch | 25.4 module |
| Min. pitch | 0.1 module |
| Max. tooth length | 150 |
| Typical Tolerances :- | |
| Total Profile | 0.003mm |
| Adjacent Pitch Error | 0.0025mm |
| Total Pitch Error | 0.009mm |
| Total Tooth Alignment Error | 0.0025mm |
| Radial Runout | 0.005mm |
GEAR ARTEFACT
Function:- Highly accurate lead and involute artefact for verification of gear testing machines.
HELICAL SPLINED ELECTRODE IN COPPER
Function:-
Spark erosion of helical internal profiles.
MASTER WORM GEARS
|
||||||||
HELICAL INTERNAL MASTER COMPONENT REPLICA
| Conform to any of the following standards :- | |
| ISO (International) | |
| DIN (German) | |
| BS (British) | |
| AGMA (American) | |
| JIS (Japanese) | |
| Range :- | |
| Max. diameter | 300mm |
| Min. diameter | 6mm |
| Max. number of teeth | 550 |
| Max. pitch | 25.4 module |
| Min. pitch | 0.1 module |
| Max. tooth length | 75 |
| Typical Tolerances :- | |
| Cylindricity of Outside Diameter | 0.005mm |
| End Face Parallelism | 0.002mm |
| Runout of Outside Diameter to Pitch Diameter of Teeth |
0.010mm |
| Total Profile | 0.003mm |
| Adjacent Pitch Error | 0.0025mm |
| Total Pitch Error | 0.009mm |
| Total Tooth Alignment Error | 0.0025mm |
